ESS Innerzone 2 Goggles w/ Nomex HeatSleeve 740-0269, Fire & Rescue EMS EMT Protective Eyewear

The ESS Innerzone2 Goggles w/ Nomex HeatSleeve 740-0269 features the patented Snap-on/Snap-off strap system and Snap-on/Snap-off mounting system, which allows the ess goggles to be stowed on the front of rear of a helmet or quickly removed. Designed to withstand the rigors of structural collapses and other hazardous situatiions that demand primary eye protection, the Inner Zone 2 740-0269 is fully NFPA compliant, including the 500 degree for 5 minute NFPA oven test.

The NFPA-compliant Innerzone 2 w/ Nomex Heat Sleeve features the patented Snap-On/Snap-Off strap and mounting system, which allows the eye safety systems goggles to be stowed on the front or rear of helmet, or be quickly removed. Patented ESS Speed-Clip strap system makes strap adjustment quick and easy. These goggles will protect your eyes in almost any hazardous situations, making it possible to preform all your duties when required.

Firefighters can use the Innerzone II 7400269 w/ Nomex HeatSleeve alone or together with flip-downs or a face shield. Eye Safety Systems Innerzone Goggles are must have Primary Eye Protection that Snaps on Helmets in Seconds and is ideal solution for Firefighters, EMT personel and EMS personel (Emergency Medical Technician and Emergency Medical Services), who requires eye protection for wildfires and other hazardous activities. Roomy frame is designed to fit over most eyeglasses; ESS Striker Goggle Rx Insert also available.

ESS Innerzone Goggles are fully compliant with the following standards and regulations:

• NFPA Standard 1971-2000
• NFPA Standard 1951-2000
• US MIL-V-43511C
• ANSI Z87.1+2003
• US Federal OSHA standards
• CE EN 166 (B)

Eye Safety Systems Innerzone 2 Key Features:

• NFPA Compliant
• Snap-on/Snap-off Brackets
• Speed-Clip Straps
• 2.4mm Lenses
• Interchangeable Lenses
• ANSI-Compliant
• 2-Piece Strap System
• Fits Over Glasses
• Nomex HeatSleeve

RX Insert for ESS Innerzone 2 7400269:

• RX prescription lenses can be fit by any optometrist into the ESS Striker Goggle Rx Insert, which installs inside the eye safety systems goggle frame.

Innerzone2 Goggles w/ Nomex Heat-Sleeve Mounting System:

• Functions well with all major structural firefighting helmet designs.
• High heat-resistant mounting brackets carry a lifetime warranty and securely attach to helmet brim, no drilling required.
• Patented Snap-on/Snap-off mounting system allows goggles to be quickly removed and stored in a pocket.
• Strap grommets snap on and off the mounting brackets.
• The Innerzone 2 can be used on a helmet alone or together with a face shield or flip-downs.

ESS Inner Zone 2 Goggles Strap System:

• Two-piece strap system made of 26mm-wide, high-memory woven Nomex.
• Patented Speed Clip strap system makes strap adjustment quick and easy, even with gloves on.

Eye Safety Systems Goggles Frame:

• Frame made from high heat-resistant materials.
• Full-perimeter ventilation and filtration system prevents lens fogging while filtering out dust, smoke, and particles.
• Fits comfortably over most prescription eyewear.

Innerzone 2 Lenses:

• Lenses feature ESS ClearZone anti-fog and anti-scratch lens coatings.
• All lenses provide 100% UVA-UVB protection and precise optical clarity for distortion-free vision.
• Lenses are highly impact Resistant, and exceed the U.S. Military's .22 caliber ballistic impact test MIL-V-43511C

FIREFIGHTER TOUGH Seal. This product:
	Is widely used in Firefighting, Rescue, and Emergency Medical Services. Meets requirements for ANSI Z87.1-2003+ and US Federal OSHA standards. Meets requirements for US Military ballistic standards. Is proven to withstand the abuse of firefighting and rescue operations. Will support the execution of your duties.